Current Voltage Power & Frequency Transducers

Bi-directional Current Transducers  t Click

Provide an isolated bi-polar output directly proportional to the input current.  the output signal tracts the input current waveform and recreates almost any AC, DC, transient or complex current combination.

Click u   Series No.

905B  909M4  926  929  943  944  947  948  9000  S273  S449  S630  S651  S661B  S745  S764  S784

DC Current Transducers t Click

Monitor DC Current by providing a magnetically isolated analog output that is directly proportional to the input.  Low current ranges are available for differential and ground fault current monitoring.

Click u  Series No.

903B  904B  913A  913B  920  921  936  950  952  DCT  S218  S347  S444  S465  S619  S646  S728B  S767  S770

DC Current Detectors t Click

Compare the DC input to a fixed or adjustable current threshold.  The output is an isolated switch or relay that activates as required.  DC current detectors are suited for ground fault current monitoring.

Click u Series No.

901B  S58  S201  S204  S623  S629  S680  S754

AC Current Transducers t Click

Maintain isolation and provide an analog DC output directly proportional to AC input current.  True-RMS and average responding products are available in clamp-on and pass-thru configurations.

Click u Series No.

1001  1002M1  1003AM1  1003AM2  1004  1005  1006  1006X  1055  1055L  1070  ACT  ACTS  C  CX  S383  S383L  S402  S461  S714  S786

AC Current Detectors t Click

Compare the AC input to a fixed or adjustable current threshold.  The output is an isolated switch or relay that is activated as required.  Products available in clamp-on and pass-thru configurations.

Click u Series No.

870  871  880B  881  882  ACS  ACS-3  ACS-SC  S212

AC Voltage Transducers t Click

Produce an isolated analog output signal directly proportional to AC voltage at a variety of frequencies.  High sensitivity versions are available with zero suppressed AC input voltage ranges.

Click u  Series No.

101M3  102M3  105  108  108X  V  VX  S190

DC Voltage Transducer & Detector t Click

Series S657 produces an isolated analog output proportional to DC voltage.  Series S631 compares the DC input to an adjustable threshold.  The output is an isolated relay that activates as required.

Click u Series No.

S631  S657

AC Power Transducers t Click

Provides an isolated analog DC output directly proportional to AC input power.  True power (Watts) and volt-amp-reactive (VAR) transducers are available for a variety of power ranges and frequencies.

Click u  Series No.

415A  416A  S73  S217  W&Q

Frequency Transducers t Click

Provides an isolated analog DC output signal directly proportional to AC input frequency.  Many ranges are available, starting at 5 to 100Hz and all the way up to 1K to 20KHz.

Click u Series No.

S343  S350L