|
FIRST: Scroll down to choose a category and click for
descriptions and photos of all models in the group. NEXT: pick a series and click the data sheet for part numbers,
specifications, dimensions and options. Or, if you already know the
product you want, just click the series in the table below. |
|
In addition to the products offered here, there are many specials and modified versions available. So, if you can’t find what you need, give us a call Toll-free (888) 873-8559 AAC – American Aerospace Controls, Inc. | ||
|
AC & DC Current, Voltage, Power and Frequency | ||||
|
|
Bi-directional Current
Transducers
Provide an isolated bi-polar output directly proportional
to the input current. The
output signal tracts the input and recreates almost any AC, DC, transients
or complex current waveform combination. Series: 905B 909M4 926 943A 944 947 948 9000 S273 S449 S630 S651 S661B S745 S764 S784 |
16 product descriptions & photos
| ||
|
|
DC Current Transducers
Monitor DC current by providing a magnetically isolated
analog output that is directly proportional to the input. Low current ranges are available for
differential (ground fault) current monitoring. Series: 903B 904B 913A 913B 920 921 936 950 952 DCT S218 S347 S444 S465 S619 S646 S728B S767 S770 |
19 product descriptions & photos
| ||
|
|
DC Current Detectors
Compare the DC input to a fixed or adjustable current
threshold. The output is an
isolated switch or relay that activates as required. DC current detectors are suited for
ground fault current monitoring. |
8 product descriptions & photos
| ||
|
|
AC Current Transducers
Maintain isolation and provide an analog DC output directly
proportional to AC input current. True-RMS
and average responding products are available in clamp-on and pass-thru
configurations. Series: 1001 1002M1 1003AM1
1003AM2 1004 1005 1006 1006X 1055 1055L ACT ACTS C CX
S383 S383L S402 S461 S714 S786 |
20 product descriptions & photos
| ||
|
|
AC Current Detectors
Compare the AC input to a fixed or adjustable current
threshold. The output is an
isolated switch or relay that is activated as required. Products available in clamp-on and pass-thru
configurations. |
9 product descriptions & photos
| ||
|
|
AC Voltage Transducers
Produce an isolated analog output signal directly
proportional to AC voltage at a variety of frequencies. High sensitivity versions are
available with zero suppressed AC input voltage ranges. |
8 product descriptions & photos
| ||
|
|
DC Voltage Transducer
& Detector
The S657 provides an isolated 4 to 20mA output signal
directly proportional to the input DC voltage. The S631 provides relay contacts
that are activated when the DC input exceeds a pre-set threshold. |
2 product descriptions & photos
| ||
|
|
AC Power Transducers
Provides an isolated analog DC output directly proportional
to AC input power. True power
(Watts) and volt-amp-reactive (VAR) transducers are available for a variety
of power ranges and frequencies. |
5 product descriptions & photos
| ||
|
|
Frequency Transducers
Provides an isolated analog DC output signal directly
proportional to AC input frequency. Many
ranges are available, starting at 5 to 100Hz and all the way up to 1K to
20KHz. |
2 product descriptions & photos
| ||
